Please note, our website uses cookies saved in the end user's equipment. Use of this website constitutes acceptance of the Rules of the portal.
Here you can read the terms of our portal Dont show this message again

APC • VPN: BK650EI • EAN: 0731304219781 • AX-ID: APBK650EI

APC Back-UPS 650VA 230V

APC by Schneider Electric Back-UPS BK650EI Standby UPS - 650 VA/400 W - 2.40 Minute Stand-by - 220 V AC Input - 230 V AC Output - 3 x IEC 60320 C13, 1 x IEC 60320 C13
Basic
Waveform Type
Stepped Sine Wave
Battery Life
6 Year
Receptacles
3 x IEC 60320 C13, 1 x IEC 60320 C13
Product Type
Standby UPS
Product Family
Back-UPS CS
Plug/Connector Type
IEC 320-C14
Load Capacity (Watt)
400 W
Load Capacity (VA)
650 VA
Input Voltage
220 V AC
Hot Swappable
Yes
Brand Name
APC by Schneider Electric
Backup/Run Time (Half Load)
11.40 Minute
Backup/Run Time (Full Load)
2.40 Minute
Battery Information
Backup/Run Time (Half Load)
11.40 Minute
Battery Characteristics
Spill-proof, Maintenance-free
Hot Swappable
Yes
Typical Battery Recharge Time
8 Hour
Battery Life
6 Year
Battery Chemistry
Sealed Lead Acid (SLA)
Backup/Run Time (Full Load)
2.40 Minute
Controls/Indicators
Status Indicators
  • On Line
  • On Battery
  • Replace Battery
  • Overload
Environmental Conditions
Maximum Operating Temperature
45°C
General Information
Product Type
Standby UPS
Product Model
BK650EI
Brand Name
APC by Schneider Electric
Manufacturer
Schneider Electric SA
Manufacturer Part Number
BK650EI
Manufacturer Website Address
http://www.schneider-electric.com
Product Line
Back-UPS
Product Name
Back-UPS CS 650VA 230V, Back-UPS CS 650VA
Product Series
CS
Interfaces/Ports
USB
Yes
Serial Port
Yes
Management
Alarm
On Battery, Overload, Low Battery
Miscellaneous
Package Contents
  • Back-UPS CS 650VA
  • CD with software
  • USB cable
  • User Manual
,
  • Back-UPS CS 650VA 230V
  • CD with software
  • USB cable
  • User Manual
Additional Information
  • Automatic restart of loads after UPS shutdown
  • Transformer-block spaced outlets
  • Battery replacement without tools
  • Power conditioning
Certifications & Standards
  • A-tick
  • C-tick
  • CE
  • GOST
  • NEMKO
  • PCBC
,
  • EN 55022
  • IEC 801-2
  • IEC 801-4 (level IV)
  • IEC 801-3 (level III)
  • A-tick
  • C-tick
  • CE
  • GOST
  • NEMKO
  • PCBC
Physical Characteristics
Width
101.6 mm, 90 mm
Height
177.8 mm, 170 mm
Depth
279.4 mm, 280 mm
Colour
Beige
Weight (Approximate)
6 kg, 5.90 kg
Power Description
Load Capacity
650 VA/400 W
Output Voltage
230 V AC
Waveform Type
Stepped Sine Wave
Input Voltage
220 V AC
Technical Information
Receptacles
3 x IEC 60320 C13, 1 x IEC 60320 C13
Plug/Connector Type
IEC 320-C14
Warranty
Limited Warranty
2 Year
We do not guarantee, that all technical data we publish, are free of any mistakes or missing information. In case of doubts, please contact your Ingram Micro product manager before placing your order. We would like to inform you, that all included pictures have illustrative character only.